Meet the LED’s secret rule: it only lets electricity pass in one direction.
एलईडी का राज़: ये बिजली को सिर्फ एक ही दिशा में जाने देती है।
🎯 What are we building?
We build the LED circuit, then turn the LED around and see what changes. You will discover that an LED has a positive leg (the longer one) and a negative leg.
🔌 Circuit diagram
Wire it just like this on your breadboard. The coin cell pushes, the resistor protects, the LED glows.
🎮 Play with this experiment⚙️ How does it work?
An LED is like a one-way street for electricity. When the current enters from the positive leg it flows and the LED glows. When it is reversed, the street is blocked, so there is no light and nothing gets harmed.
🌍 Where is this used in real life?
- Phone chargers use one-way parts so power never flows backwards.
- Solar garden lights stop the battery from leaking power back into the panel at night.
- Every battery-operated toy has a plus and a minus marking so we connect it correctly.
💡 What could YOU invent with it?
Make a “Right-Way Tester” for your class: a tiny gadget with an LED that lights up only when a battery is placed correctly. It helps younger kids and even elders put batteries in torches and remotes without confusion.
🧪 Try this!
Look closely at an LED: which leg is longer? Which side of the plastic bulb is flat? Write down what you find.
🎯 हम क्या बना रहे हैं?
हम एलईडी सर्किट बनाते हैं, फिर एलईडी को उल्टा करके देखते हैं कि क्या बदलता है। आप जानोगे कि एलईडी का एक पॉज़िटिव पैर (लंबा वाला) और एक नेगेटिव पैर होता है।
🔌 सर्किट डायग्राम
अपने ब्रेडबोर्ड पर बिल्कुल ऐसे जोड़ो। कॉइन सेल धकेलती है, रेसिस्टर बचाता है, एलईडी जलती है।
🎮 इस एक्सपेरिमेंट के साथ खेलो⚙️ ये कैसे काम करता है?
एलईडी बिजली के लिए एक-तरफ़ा सड़क की तरह है। करंट पॉज़िटिव पैर से अंदर आए तो बहता है और एलईडी जलती है। उल्टा लगाओ तो सड़क बंद हो जाती है, इसलिए रोशनी नहीं आती और कुछ बिगड़ता भी नहीं।
🌍 असली ज़िंदगी में ये कहाँ काम आता है?
- फोन चार्जर में एक-तरफ़ा पुर्ज़े होते हैं ताकि बिजली कभी उल्टी न बहे।
- सोलर गार्डन लाइट रात में बैटरी की बिजली को वापस पैनल में जाने से रोकती है।
- हर बैटरी वाले खिलौने में प्लस और माइनस का निशान होता है ताकि हम सही जोड़ें।
💡 इससे आप क्या नया बना सकते हो?
अपनी क्लास के लिए “सही-तरफ़ टेस्टर” बनाओ: एक नन्हा गैजेट जिसमें एलईडी तभी जलती है जब बैटरी सही तरफ़ लगी हो। इससे छोटे बच्चे और बड़े-बुज़ुर्ग भी टॉर्च और रिमोट में बैटरी बिना उलझन के लगा सकते हैं।
🧪 खुद करके देखो!
एलईडी को ध्यान से देखो: कौन सा पैर लंबा है? प्लास्टिक के बल्ब का कौन सा किनारा सपाट है? जो मिले उसे लिख लो।
इलेक्ट्रॉनिक्स और सोलर स्टार्टर किट
Get the kit / किट खरीदें →
