✨ 1:1 Online Live Robotics & Coding Classes for KidsTry a free class →
🤖 Build real robots at home with our Starter KitsShop kits →
🎮 New! Build circuits on screen in our free Circuit PlaygroundPlay now →
🚀 Inspiring Minds, Igniting FuturesOur story →
IR Security Alarm

IR Security Alarm: Guard Your Treasure Box | आईआर सिक्योरिटी अलार्म: अपने ख़ज़ाने के डिब्बे की रखवाली

Experiment 27 · Arduino Nano Coding & Electronics Kit🛡️

Anyone who reaches for your box sets off the lights and the siren.
जो भी आपके डिब्बे की ओर हाथ बढ़ाए, उसकी लाइट और सायरन बज उठेंगे।

🎯 What are we building?

We combine the sensor, an LED and the buzzer to make an alarm. When the sensor notices a hand near the box, the LED flashes and the buzzer sounds.

Arduino NanoArduino NanoIR SensorIR SensorLEDLEDBuzzerBuzzerResistorResistorBreadboardBreadboardWiresWires

🔌 Circuit diagram

Arduino Nano5VD13D8D2GNDIR sensor moduleVCCOUTGND220 ΩLEDBuzzer
IR beam bounces→OUT → D2→if == LOW ?→D13 → LED→D8 → Buzzer

Pin numbers follow the Kod2Kids books. You can use other pins, just change the same numbers in the code.

📘 Related lab: Class 5 book, Lab 7 (Object Alarm with Buzzer and Light).

🎮 Play with this experiment

⚙️ How does it work?

The sensor is the watchman. When it spots a hand it tells the Nano, which then runs the alarm steps: flash the light and beep. Using both light and sound makes the alarm harder to ignore.

🌍 Where is this used in real life?

  • Shop alarms and bank vaults use sensors to detect intruders.
  • Museums protect valuable art with invisible beams.
  • Home security systems alert families when someone enters.

💡 What could YOU invent with it?

Invent a “cookie-jar guard” for your kitchen or a “school locker alert”. It could help small shopkeepers or families protect things without expensive equipment.

🧪 Try this!

How can you make your alarm quieter at night but still noticeable? Think about both light and sound.

🎯 हम क्या बना रहे हैं?

हम सेंसर, एलईडी और बज़र जोड़कर अलार्म बनाते हैं। जब सेंसर डिब्बे के पास हाथ देखता है तो एलईडी चमकती है और बज़र बजता है।

Arduino Nanoअरुडिनो नैनोIR Sensorआईआर सेंसरLEDएलईडीBuzzerबज़रResistorरेसिस्टरBreadboardब्रेडबोर्डWiresतार

🔌 सर्किट डायग्राम

Arduino Nano5VD13D8D2GNDIR sensor moduleVCCOUTGND220 ΩLEDBuzzer
आईआर किरण टकराती है→OUT → D2→अगर == LOW ?→D13 → एलईडी→D8 → बज़र

पिन नंबर Kod2Kids की किताबों के हिसाब से हैं। आप दूसरे पिन भी लगा सकते हो, बस कोड में वही नंबर बदल दो।

📘 संबंधित लैब: क्लास 5 की किताब, लैब 7 (बज़र और लाइट वाला ऑब्जेक्ट अलार्म)।

🎮 इस एक्सपेरिमेंट के साथ खेलो

⚙️ ये कैसे काम करता है?

सेंसर चौकीदार है। हाथ दिखते ही वो नैनो को बताता है, जो अलार्म के कदम चलाता है: बत्ती चमकाओ और बीप करो। रोशनी और आवाज़ दोनों होने से अलार्म को अनदेखा करना मुश्किल होता है।

🌍 असली ज़िंदगी में ये कहाँ काम आता है?

  • दुकानों के अलार्म और बैंक के लॉकर घुसपैठियों को पहचानने के लिए सेंसर इस्तेमाल करते हैं।
  • संग्रहालय क़ीमती कलाकृतियों को अदृश्य किरणों से बचाते हैं।
  • घर की सुरक्षा प्रणालियाँ किसी के अंदर आने पर परिवार को सचेत करती हैं।

💡 इससे आप क्या नया बना सकते हो?

रसोई के लिए “बिस्कुट के डिब्बे का पहरेदार” या “स्कूल लॉकर अलर्ट” बनाओ। इससे छोटे दुकानदार और परिवार महँगे उपकरण के बिना अपनी चीज़ें सुरक्षित रख सकते हैं।

🧪 खुद करके देखो!

अपने अलार्म को रात में कम शोर वाला पर फिर भी ध्यान खींचने वाला कैसे बनाओगे? रोशनी और आवाज़ दोनों के बारे में सोचो।

🛒 Build this at home! / घर पर बनाओ!Arduino Nano Coding & Electronics Kit · ₹999
अरुडिनो नैनो कोडिंग और इलेक्ट्रॉनिक्स किट

Get the kit / किट खरीदें →

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart

Book A Free Demo Session

Join us for an exciting adventure into the world of robotics and coding! Our Robotics and Coding Class for Kids is designed to inspire young minds, foster creativity, and ignite a passion for technology.

Contact Info

Email

info@kod2kids.com