✨ 1:1 Online Live Robotics & Coding Classes for KidsTry a free class →
🤖 Build real robots at home with our Starter KitsShop kits →
🎮 New! Build circuits on screen in our free Circuit PlaygroundPlay now →
🚀 Inspiring Minds, Igniting FuturesOur story →
Three LED Circuit

Three LED Circuit: Build a Colourful Light Set | तीन एलईडी सर्किट: रंगीन लाइट सेट बनाओ

Experiment 06 · Electronics & Solar Starter Kit🌈

Three LEDs, one circuit: make your first colourful light board.
तीन एलईडी, एक सर्किट: बनाओ अपना पहला रंगीन लाइट बोर्ड।

🎯 What are we building?

We connect three LEDs, maybe of different colours, so they all glow. It is a small step towards displays and signs made of many lights.

BreadboardBreadboardLEDLEDResistorResistorCoin CellCoin CellWiresWires

🔌 Circuit diagram

3V+−Coin cell330 ΩLED330 ΩLED330 ΩLEDEach LED has its own resistor. All of them share the same coin cell.
Coin cell +→each 330 Ω→each LED→back to Coin cell −

Wire it just like this on your breadboard. The coin cell pushes, the resistor protects, the LED glows.

🎮 Play with this experiment

⚙️ How does it work?

Each LED needs enough electricity to glow. With a small coin cell, three LEDs in a row will be dimmer than one, so we place them in separate paths with their own resistors to keep them bright.

🌍 Where is this used in real life?

  • Advertising boards and shop signs are made of hundreds of LEDs.
  • Colourful decoration lights during Diwali use the same idea.
  • Status lights on a router or inverter show different states with different colours.

💡 What could YOU invent with it?

Design a “mood board” that shows how you feel today in colour: green for happy, yellow for okay, red for sad. It could help children who find it hard to say their feelings out loud.

🧪 Try this!

Can you make each LED a different colour? Draw your design on paper before you build it.

🎯 हम क्या बना रहे हैं?

हम तीन एलईडी जोड़ते हैं, चाहें तो अलग-अलग रंगों की, ताकि सब जल उठें। ये कई बत्तियों से बने डिस्प्ले और साइन-बोर्ड की तरफ़ पहला छोटा कदम है।

Breadboardब्रेडबोर्डLEDएलईडीResistorरेसिस्टरCoin Cellकॉइन सेलWiresतार

🔌 सर्किट डायग्राम

3V+−Coin cell330 ΩLED330 ΩLED330 ΩLEDEach LED has its own resistor. All of them share the same coin cell.
कॉइन सेल +→हर 330 Ω→हर एलईडी→वापस कॉइन सेल −

अपने ब्रेडबोर्ड पर बिल्कुल ऐसे जोड़ो। कॉइन सेल धकेलती है, रेसिस्टर बचाता है, एलईडी जलती है।

🎮 इस एक्सपेरिमेंट के साथ खेलो

⚙️ ये कैसे काम करता है?

हर एलईडी को जलने के लिए काफ़ी बिजली चाहिए। छोटी कॉइन सेल से एक लाइन में लगी तीन एलईडी एक के मुक़ाबले हल्की जलेंगी, इसलिए हम उन्हें अलग-अलग रास्तों पर, अपने-अपने रेसिस्टर के साथ लगाते हैं ताकि वे तेज़ रहें।

🌍 असली ज़िंदगी में ये कहाँ काम आता है?

  • विज्ञापन के बोर्ड और दुकानों के साइन सैकड़ों एलईडी से बनते हैं।
  • दिवाली की रंगीन सजावट वाली लाइटें इसी सोच पर चलती हैं।
  • राउटर या इन्वर्टर की स्टेटस लाइटें अलग-अलग रंग से अलग हालत बताती हैं।

💡 इससे आप क्या नया बना सकते हो?

एक “मूड बोर्ड” डिज़ाइन करो जो रंग से बताए कि आज आप कैसा महसूस कर रहे हो: हरा खुश, पीला ठीक-ठाक, लाल उदास। जिन बच्चों को अपनी भावनाएँ बोलकर बताना मुश्किल लगता है, उनकी इससे मदद हो सकती है।

🧪 खुद करके देखो!

क्या हर एलईडी को अलग रंग की बना सकते हो? बनाने से पहले कागज़ पर अपना डिज़ाइन बनाओ।

🛒 Build this at home! / घर पर बनाओ!Electronics & Solar Starter Kit · ₹499
इलेक्ट्रॉनिक्स और सोलर स्टार्टर किट

Get the kit / किट खरीदें →

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart

Book A Free Demo Session

Join us for an exciting adventure into the world of robotics and coding! Our Robotics and Coding Class for Kids is designed to inspire young minds, foster creativity, and ignite a passion for technology.

Contact Info

Email

info@kod2kids.com